|
#1
|
||||
|
||||
![]()
I have just purchased a second hand Novak Brushless 6.5R for my B4.
The novak manual recommends a 17-18 pinion for a 81 spur in a B4. I was thinking of the 17 due to the fact ti is a smaller track with many tight turns. However I have read in a few places that in the B4 that this does not fit and you have to use a different spur. Is this the case and what set-ups do other people have? Thanks |
#2
|
|||
|
|||
![]()
I use 23/81 all the time with a 6.5L Novak.
Bill uses 23/81 on his 7.5R. I posted a post a week ago about gearing for a 6.5 and nearly everyone said to start on a 23 ![]()
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups ![]() |
#3
|
|||
|
|||
![]()
I am using 18/81.
I was using an xcelorin speedo with a 6.5T Losi, now I've got a Novak GTB, with a Novak velocity 6.5. Acceleration is fantastic, and top end is more than I can handle. I'm only driving for fun though, not racing ![]() In the manual of the Novak GTB ESC, it does mention 18/81 as a good starting point for a B4 too. |
#4
|
||||
|
||||
![]()
just remember that the manual set up is based on a dirt track loose grip set up,i would have said 1 or 2 teeth higher for UK,
__________________
Mattys the driver,my names carl
|
![]() |
Thread Tools | |
Display Modes | |
|
|