I've got a Hot Bodies D8 that I bought from new and converted to brushless. I still have all the original nitro bits new in bags, so if you wanted to use it as nitro then just put these bits on instead! You would need a new radio tray though (#67368) - these are £12.49 (RRP).
It has (currently mounted) an RC-Monster D8 motor mount, and a custom made Delrin battery tray (internal dimensions 170 x 58mm), which also has a compartment on the back for an ESC.
Comes with high mount rear tower - brand new, and also a Tekno-RC chassis which had been quite bashed around, though would still be good for 'experimenting'.
The car has been used for two race meetings, and is one of the later cars that doesn't have the driveshaft breakage issue.
Please note, no electronics are included. PM me with offers.
Can provide a PolyRC/PolyQuest/Enerland 6S 6100mAh with 3 cycles on it for a bit extra - this should easily get you 25 minutes for long finals. It got me 26 minutes!
Just a quick pic, it's getting a clean tomorrow!
22-08-2009
Hot Bodies D8 with both Brushless bits and nitro bits - testing the water.
Linear Mode
