Schumacher wheel conversion to 12mm hex

[Raul Garcia]

The are from New Era. Made for the Rascal, required some modification to fit but done none the less..

[Funkymojo]

Originally Posted by Raul Garcia

The are from New Era. Made for the Rascal, required some modification to fit but done none the less..

Looks good, so what modification did you do to get it to fit? Cheers

[Raul Garcia]

Well first the Rascal spline is 10mm, and the CAT spline is 8mm. So, the spline had to be shaved down, I used a old outdrive part for the driveshaft, bolted it together, then lightly sanded with a flexible sanding disc on my dremel to fit inside the bearing to 8mm, then I had a machinist cut the hexes to be very narrow, because the track width is to wide with any aray of available wheel. I ended up using Kyosho SP (New style) rear wheel, and Kyosho 4wd SP 4wd front rim.

[jeroen206]

http://www.racing-cars.com/forum/for...?TID=8508&PN=2



http://www.racing-cars.com/products.asp?recnumber=87
http://cgi.ebay.com/10x16-x5mm-Black...4.c0.m14.l1262