Go Back   oOple.com Forums > Car Talk > Team Associated

Reply
 
Thread Tools Display Modes
  #1  
Old 27-03-2010
jamiekerr14's Avatar
jamiekerr14 jamiekerr14 is offline
Senior Member
 
Join Date: Nov 2008
Location: Uk
Posts: 831
Default Silly Question-Would like some opinions..

Hey guys, long story short.. I last weekend stripped a front 1.. and stupidly and in a rush ordered some new Schu Mini pins.. pre-glued. And not massively into 1/10th-1/8th is my area. I forgot these sodding 1/10th's all have different wheel fittments-Bit of a joke.. if you ask me.. but hey ho..

Um, and the schuey's are on Rev-Lite wheels both take the single-pin design.. I was wondering-If it is possible for the front to remove the hex-And shim out the pin-so that the front would work.. I tested it earlier without shims and worked just fiddling by hand.. but wondering if pad out the -Play -Like the rear but the shaft is slightly shorter. Would that work... for just some general use ect.. Or is it a complete no go.. I dont really want to have to fork out for some new rims ect and tyre's. I dont have the time to take them off the rev-lites. Would this work at all? anyone tried it. I will when have spare £ get new ones ect.. but for the time being.. I cant see too much of a issue.. apart from maybe little more wear on bearing ect.. just wanted to seek some help before I tried it.. or did and screwed a wheel as well..

thanks guys!
Reply With Quote
  #2  
Old 27-03-2010
discostu's Avatar
discostu discostu is offline
Mad Member
 
Join Date: Jul 2008
Location: Whitstable
Posts: 1,571
Default

there is no reson why it wouldn't be ok if its shimed correct
Reply With Quote
  #3  
Old 27-03-2010
Big G's Avatar
Big G Big G is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Apr 2009
Location: Lincoln
Posts: 2,696
Send a message via MSN to Big G Send a message via Skype™ to Big G
Default

as long as there's enough thread poking out of the wheel I won't see why this wouldn't work tbh
Reply With Quote
  #4  
Old 27-03-2010
jamiekerr14's Avatar
jamiekerr14 jamiekerr14 is offline
Senior Member
 
Join Date: Nov 2008
Location: Uk
Posts: 831
Default

Well, I went ahead anyway.. and gave it a few mins blast on the grass.. and seemed fine. Did few runs and stopped. Checked the wheel slots and there fine no play being created or starting to warp the slot. Yea I luckly has x2 shims which fit perfectly!.. so thats a added bonus.. so looks like I will be racing tomo after all haha.. thanks guys.. then will sort some new rims ect soon.. but should be ok for the time being fingers crossed!
Reply With Quote
  #5  
Old 28-03-2010
Devastator's Avatar
Devastator Devastator is offline
New Member
 
Join Date: Jan 2010
Location: Melton Mowbray
Posts: 27
Default

I just took the hex thing off and wacked it straight onto the pin (same mini pins on rev lites) and haven't had any issues.
Reply With Quote
  #6  
Old 28-03-2010
jamiekerr14's Avatar
jamiekerr14 jamiekerr14 is offline
Senior Member
 
Join Date: Nov 2008
Location: Uk
Posts: 831
Default

Yea thats what i did and just shimmed some of the side play out.. seems fine.. will probably keep them but get new- hex set ect.. just use these for more bashing/garden mucking about..
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:59 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com