|
#1
|
|||
|
|||
![]()
Hi
i usually do the boiling tires in water method to remove the tires. dont like ussing accetone. anyone know if boiling the tires, the zx-5 rims will warp? |
#2
|
||||
|
||||
![]()
cant see it warping them, but im sure it will temper them in some way
__________________
Mattys the driver,my names carl
|
#4
|
|||
|
|||
![]()
use acetone works fine.
__________________
regards Andreas ----------------------------------------------- BJ4 WE; Durga; Dark Impact ;TT-01 |
#5
|
|||
|
|||
![]()
did boiling today... after about 45minutes, it pretty much peeled straight off. rims dont warp.
with your acetone, how long u leave them in there for? |
#6
|
|||
|
|||
![]()
should ease off after 24 hours if submerged fully. depends how much glue was on there. better to leave for 48+ hours if poss. and if there is some residue left on the rims once you have taken the tyres off then just put the wheels back in by themselves for a few hours.
__________________
4wd - X4TE 2wd - X2C (Mad Rat passed down to son!) Ansmann Racing UK RIP - MicroTech Racing Trader Feedback |
#7
|
|||
|
|||
![]()
You coul also try baking them in the oven, be warned though, it can smell pretty much after doing it
![]() 110-125 C is enough, for about 15 minutes. |
#8
|
||||
|
||||
![]()
The quickest & easiest method has to be the oven method. See my step-by-step insturctions here:
http://lawfordbuggyclub.myfastforum....9-0-0-asc-.php |
![]() |
Thread Tools | |
Display Modes | |
|
|