|
#1
|
||||
|
||||
![]()
hi there just looking at electrics for the conversion, has anyone got a link to the lipos and brushless needed etc
|
#2
|
||||
|
||||
![]()
also will i have to buy a 4 cell lipo
or can i buy two 2 cell trakpowers and make a Y-Lead |
#3
|
||||
|
||||
![]()
yes you can run 2 lots of trackpowers with a y lead ur best bet would be http://www.rc-monster.com/
|
#4
|
||||
|
||||
![]()
There's so much on the market that it's hard to list everything. I'll cover a few though.
ESC/Motors
Motors
Conversion Bits
Lipos Use your Trakpowers (provided they are the 4900mAh 25C ones), and wire them in series to get 14.8V, 4900mAh capacity. You need the higher capacity and discharge (C) rating to be able to run a high power brushless set-up (you want to aim for about 100A Continuous and 200A burst with 4S) None of the lists are in any particular order, just as I thought of them. My personal choices would be:
Hope this has helped.
|
#5
|
||||
|
||||
![]()
Nice post Marvin, this will save someone loads of time and effort.
|
![]() |
Thread Tools | |
Display Modes | |
|
|