|
#1
|
||||
|
||||
![]()
Hi, guys, I recently purchased a second hand pre-worlds BJ4.
I was looking on the JConcepts website for a few maintenance parts like diff plates, balls and gears, but they don't seem to list anything like that. The best I could find were some BJ4 Worlds slipper plates. Does anyone know if there is a more comprehensive list of parts for sale? Or somewhere else I can get parts from, or even if I can use B44 drive train parts? Thanks, Ben |
#2
|
|||
|
|||
![]()
Hi Ben,
JCconcepts only sell the JC specific parts as spares, AE parts like the diff plates ect should be sourced from your LHS ![]() B44 diff's can be used but the inners are slightly different from the NTC3 diffs that come with the BJ4. Main/thrust balls, crown gear and thrust washers are the same - outdrives and diff plates are different on the B44 diff. Note sure about the screw/spring/t-nut as I've not had a B44 diff apart. |
#3
|
||||
|
||||
![]()
So can I just use a complete B44 diff?
|
#4
|
|||
|
|||
![]()
Yes you can
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|