Anyone know how much these are worth?

[stebedford]

Ok due to being ripped off when buying a Hong Nor X1 CR ive had to sell the spare parts I had for it to buy a new engine.

Does anyone know how much these are worth?

Complete front end

Complete Rear end

Chassis with some extras (the chassis has a lot of scratches on the bottom of it but still in good condition)

All of these are part of a Hong Nor X1 CR (not the CRT truggy)

If anyone could give me a rough idea of how much I could expect to get for these that would be great.

[greasy mark]

sorry to say dude you wont get much for those id strip out the diffs and sell them seperatly its an rtr x1 you have there and quite an old one as it has the 13mm shocks on it .

[stebedford]

any idea roughly how much they are worth?

[greasy mark]

a good condition x1 cr pro roller would go for around 75-90 quid depending on what it had with it rtr would be a lot less than that sorry dude read your other post id def go and visit the seller and try n get a resolve that way

[stebedford]

Originally Posted by greasy mark

a good condition x1 cr pro roller would go for around 75-90 quid depending on what it had with it rtr would be a lot less than that sorry dude read your other post id def go and visit the seller and try n get a resolve that way

So if i put all those parts as 1 sale??

[stebedford]

Ok, any ideas how much the full rolling chassis will sell for? everything apart from the engine would be included. Thinking about selling it to get a 1/10 electric buggy, maybe a dark impact....

[stebedford]

Someone must have an idea how much a rolling chassis would be worth (or sell for) it has everything with it apart from an engine, even has a rota start. or would it be worth including the engine with a crack in it?

[ch!3f]

strip it to parts and sell it that way will prob get more for it.

stick it on the bay on buy it now prices for 30days if not sold by 15 days lower your prices abit they will sell on there.

check parts prices in modelshops n half them and list as used.

[stebedford]

Someone has just offered £70 for the buggy as it is, worth it? or should I just split it as you said? Just checked on modelsport, the big bore shocks are £55 new (which are what I have on it at the moment)

[mambamax]

how much you wanting for the wheels and bigbores mate

[stebedford]

not sure at the moment, pm me with an offer, have you seen the pics of it? The wheels arent standard

[Marvin]

Did you go and buy the big bores afterwards, or did they come fitted with the car?

The 'big bores' you have got on your car are the same as the shock on the left:



In which case you haven't got THE big bore shocks (the 16mm threaded ones), which are far more desirable. These are the same as the shock on the right.

[stebedford]

they are the 1s on the right...

[ch!3f]

sorry mate the dudes right.prob get a tenna for them +pnp

id just strip if gor bits put things in pairs i.e left/right then list on the bay.

[ch!3f]

the 1s in the pic you just put on are different to 1s in 1t pics so if there the 1s in new pic there the big bore so like i sed in pm for price

[stebedford]

the shocks that were originally with this were smaller than these, ive already sold them on. Ill take 1 off tonight when i get home and take a pic of it

[Marvin]

Yeah, the 'proper' big bores will be worth far more, I was going by the pics in your first post.

[stebedford]

Just realised which pics were showing on this thread lol!

The first lot of parts (shown on the pics at the top) have gone...

Whats left is in these pics......So basically, its a full buggy with hop ups but without an engine, still torn between splitting it up and selling each part seperate or just selling it as it is (just cos ive had an offer for it already)

Is anyone else interested in any parts from this?