|
#1
|
|||
|
|||
![]()
Hyper 7 PBS
Good condition Hyper 7 PBS with plenty of upgrades and spares including: On the buggy Includes:
The upgrades help bring it higher up the ranks and make it a very good looking buggy to boot. It is in very good condition; however there is a small amount of grinding work done to the flywheel hole to allow the starter wheel to reach an 8.5 Pro flywheel. It will also come with:
The Diffs have all been rebuilt with fresh Oil and Seals (3k-5k-1k) and the shocks have fresh 35wt oil in them. Price: £150 Posted ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
#2
|
|||
|
|||
![]()
Hyper 8.5 Pro
Extremely good condition, only had 30 mins use by previous owner and only an hour at the max from me. Selling on again as I think I now want to upgrade my PC and with my new job being on Friday, Saturday and Sunday Nightshift, I just don’t have the time to get down and race on a Sunday and the week is used up sorting general lifey things out. I’m quite sad to have to sell this one (and the H7 PBS) as well as I’ve only just got back into RC and put a lot of effort into both of the buggies I have and really wanted to get involved in Racing, but without the time to, they seem a little pointless. Hopefully when I can sort a usual 9-5 job, I can look into it again, watch me get one a week after I leave now! First are the Standard Features of this buggy: ·6-Gear Spider Diffs ·FR2 Extended Main Chassis ·FR2 Extended Chassis & Engine Brace ·CNC Aluminium 43mm Engine Mounts ·CNC Aluminium Arm Holders Front & Rear ·CNC Aluminium Servo Arm ·CNC Aluminium Lightweight Wheel Hubs ·CNC Aluminium Dust Proof Wheel Nuts ·CNC Hard Aluminum Big Bore Shocks ·CNC Aluminium Clutch Shoes ·CNC Aluminium Lightweight Flywheel ·Machined Lightweight Clutchbell ·Titanium Turnbuckles ·Airfilter Support ·All 5 Available Anti-Roll Bars ·Dished Racing Wheels ·Angle Spike Tyres Included with this buggy is:
Will also come in its original Box. If collected I will also throw in a BNIP bottle of Byron Gen2 25% fuel (1/2 Gallon Tub), oh and I nice cleaning brush. Price: £260 Posted ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
#3
|
|||
|
|||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
#4
|
|||
|
|||
![]()
Hitec Aggressor CRX & Specktrum 2.4Ghz Module
Just bought this and the 2.4Ghz module, but as all the above is going, there’s no point keeping it. It’s a Hitec CRX Agressor with a 2.4GHz Module, features of the CRX to follow: ·High definition/multi-pixel LCD Display ·Dual Rate steering ·Brake ATL switchBrake lever travel limiter ·Steering wheel tension adjustment ·Trim center audible verification ·Third channel Shifting button ·Transmitter Low Battery Alarm ·Third channel Linear digital trim ·Interchangeable assorted color rubber grip pads in two sizes ·Digital Trims ·RF Indicator light ·Two-speed menu scrolling ·Model Naming. (6 Characters) ·Model select. (20 models) ·Sub-Trims ·Ch #3 Switch Set. (Shift, Linear) ·EPA. (End Point adjustment) ·Steering and Throttle Exponential travel ·ABS. (Anti-Lock braking) ·Steering to Aux/Throttle to Aux Mixing ·Timer(Up/Down) ·Servo Reversing ·Model Copy ·Model Reset. (Factory default) ·RF Indicator light ·Total Transmitter On Time Timer It has however had its front plastics changed as it looks to have been damaged by previous owner. The new plastics were taken from an SRX, so has the original CRX back and battery cover, but the SRX front. They are the same, just a different shade of grey and has SRX written on it. Function is still 100%. The Specktrum module is fairly self explaining. Works a treat. Has a bit of plastic missing from the Ariel turning point, where the Arial moves from 270 degrees to 360 Degrees upwards. Arial is still full in tact and again function is 100%. Also comes with the SRX internals which work fine. Also has the SRX back and battery tray, but has the damaged CRX front panel. Only damage is just behind where the steer wheel is. As said, it has got a mismatch of plastics, but function is 100% and is a very capable RC unit. You’ll need a Specktrum RX (Sold this elsewhere). Also comes with:
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
#5
|
|||
|
|||
![]()
Hyper 7 Chassis and side Guards
Brand spanking new Hyper 7 chassis intended for the PBS but never fitted. Comes with the Hyper 7 Pro side guards, which are also brand new. Price: £15 Posted **Or £10 with the H7 PBS** |
#6
|
|||
|
|||
![]()
All Prices are inclusive of shipping, but only insured up to £50, its £2.50 extra per £100 extra to insure.
Shipping is by 48 Hour courier and will be sent within 2-3 Days hopefully. All be well packed and all attempts made to keep items secure and safe. I have a good 100% re****tion on Ebay (450+ Feedback) so try to keep people happy elsewhere as well. I try to be as honest as I can and am Happy to take extra pictures on request. I understand how used kit no matter how little use it’s all had can depreciate, but hope you feel my requested prices are fair. Please let me know otherwise. Offers Considered, so please feel free to send some offers in if you feel the prices are a little OTT. Will consider splitting the buggies, but would need some bits confirmed to be bought before this goes ahead. I can add split prices if enough requests. |
#7
|
|||
|
|||
![]()
Bump - Offers considered.
|
#8
|
|||
|
|||
![]()
Up we go.
|
Thread Tools | |
Display Modes | |
|
|