|
||
|
 |
|
||||||||||||||||||
|
#1
07-06-2009
|
|||
|
|||
Pred x11 08
Think im gonna sell my pred x11 08 if i have any interest, get some funds in the paypal.
Recently had following parts replaced for new - shock towers, plastic chassis, rear driveshafts, pivot blocks and pins, upper wishbones, full new xbrace and shock rockers, gearbox tops, rear crown gear and pinion, diff outdrives, screws and upper pins. Car has had all bearings replaced recently as well including all steering and shock rocker bearings. 80% of transmission bearings are new ceramic/stainless. Both diffs rebuilt at the same time, rear one with new crown gear. Both have TRF 501 thrust races and have had diff screws replaced with m2x10 12.9 high tensile to prevent them snapping when running tight. Has had stickpack mod with battery slots filled with 1mm carbon sheet, 2mm carbon battery strap and has had new orange steering arms and longer cross link fitted, this mod is £40 and transforms the car making the steering a lot safer with more lock. Also has had the droop mod and and comes with a rear roll bar with the pivot position lowered as the team run. Propshaft has had bearing mod front and rear to prevent excess wear and play. All the ti turnbuckles have been replaced also. The rear toe turnbuckles are steel from the XRS as i prefer these , i will include a brand new set of titanium ones as well. Comes with a full spare diff, random spare wishbones, hubs, diff bits etc. Has B44 slipper pad cut and fitted to spur gear, this makes slipper adjustment much better and more consistent. Also has a full spring tuning kit and manual. Has two painted shells, one by blitzboy (£50) one just black. Comes with 18 pairs of rims with tyres and foams, mini pins, mini spikes some almost new some well worn. Also has some other new and used rims without tyres I will post some pictures this week and give a better idea of what comes with the spares. £275 posted Please PM me if interested - SAM |
|
#5
10-06-2009
|
|||
|
|||
|
Car also has aluminium rear wing mount with adj angle and metal brass bushed upper front wishbone ball joints (these are 30euros a pair!) as kit ones can break quite easily, and new rear diff balls when other parts swapped, front diff still smooth. I will include ti turnbuckles and plastic ball joints to put front wishbones back to kit spec. Just sorting pictures and spares list out now. . .
|
| Thread Tools | |
| Display Modes | |
|
|
[/IMG]
- electrics not included!
Linear Mode
