LOSI XX4 WC WORTH

[carlin]

HI Guys,

Just wondering how much is XX4 WC in mint condition is worth.

With manual & org box with it, also yellow rims never used out the box

The only options i know is the gold shock shafts & titainium turnbuckles

Also i havegot XXX4 G, can i use them on the XX4 instead?
I have MIP driveshafts in the XXX4, thought they be better to use

[GRIFF55]

got any pics? they vary greatly depending on what parts it has on it too.(tower strengtheners, motor clamps, servo mounts etc.)

[bald eagle]

In the region of £200 at a guess...a mate of mine just got one from the states.. a real minter.. i believe it was around the £200 mark.
Hope this helps.

[carlin]

Just waiting for some pics now so will post them up soon

[rcdunk]

yeh i got a brand new one that had been built byt never ran from the states worked out at about 200 after i had been stung by the inport duty gutted it hopefully arrives tomorrow still wondering if i should use it or not lol would like to trinity blue it all up but some of the wish list blue bits are harder to find than a good xx4 lol

[carlin]

The car has no scrathes on it or breakages.

it's in brilliant condition only run indoors few times

An its got threade shocks bodies lol.....

[rob84]

Are you looking at selling it?

[Belsten]

Ive got a pair of trinity blue alloy outdrive savers im probably going to sell soon

[carlin]

Originally Posted by rob84

Are you looking at selling it?

I dont really know thinking of using it myself or keep it boxed away.

[GRIFF55]

Originally Posted by Belsten

Ive got a pair of trinity blue alloy outdrive savers im probably going to sell soon

hi dave!

[GRIFF55]

You can get xx4's with options for peanuts or they can also go for lots, depends on who's looking. I had the one i use off ebay for £31! with trinity clamp, servo holder and cvd's. Others have fetched more with no options on. The prices vary on ones i've seen from mine to £100.

Alright, i got a bargain!!

[ashleyb4]

Can get parts cheap to i got the following...

Brand new in package graphite WE chassis
2x BNIP Green rear belts
BNIP Green Side/Front belt
BNIP set of access plugs
BNIP bearings holder inserty things
AND a very very good condition genuine trinity motor clamp for.....

40 Quid posted.

A

[ashleyb4]

And a BNIP set of 1.2 threaded shock bodies.

[rcdunk]

Originally Posted by ashleyb4

Can get parts cheap to i got the following...

Brand new in package graphite WE chassis
2x BNIP Green rear belts
BNIP Green Side/Front belt
BNIP set of access plugs
BNIP bearings holder inserty things
AND a very very good condition genuine trinity motor clamp for.....

40 Quid posted.

A

yeh i saw that went to my pay pal to see if I had enough cash to pay for it and when i went back to it no more than a minute later it had gone how gutted waas i lol

[rcdunk]

dont think any of the xxx4 stuff fits on the xx4 think the cvd's are a different length never had a xxx4 ( only ever had a xxx-s fully blinged up with all the red bits but that is going back a few years ) so cannot confirm if its right or wrong

[carlin]

Is anyone running Lipo & brushless in these cars?

What do i need to upgrade, i'm going to be running the following in the car.
I know i got to make mod for the Lipo stick.

LRP 5300LIPO
LRP Speedo
X12 6.5 Brushless

Wasnt sure if the car will handle to brushless systems & need to change few things over.

[ashleyb4]

xx4 will handle brushless no problem change your blue belt to a green belt and make sure the slipper is set correctly.

Check out the lipo xx4 thread.

A

[Belsten]

Im running lipo and brushless with no problems

[carlin]

Just to let you all know decided to sell it

I dont want to but i got get it gone need the room.

[shizzle]

anyone willing to trade a xx4 worlds edition roller for a arr xxx cr email me at
[email protected] the xxx cr is in good condition and has alot of stuff with it. email for more info thanks, shane

by the way im new here at this site and its been most helpful. thanks!!
really been wanting a good worlds edition.