|
#1
|
||||
|
||||
![]()
Hi all
I know helger do the conversion of the KO Vantage to accomodate the Spektrum module, I'm thinking of doing the conversion myself, does anyone have a pictures of the wiring required? I understand that some circuit boards need moving and antenna blanked etc. and done all that just stuck as to which spektrum pins connect to which KO pins. Any help or pic's would be appreciated, Thanks
__________________
Mike Temple |
#2
|
||||
|
||||
![]()
For the sake of the cost of the conversion, is it worth trying this yourself?
My own opinion is that for peace of mind, its worth letting helger sort it, even though we may be capable of doing it ourselves. The transmitter has a lot of responsibility to hold a line of communication, unbroken, with the receiver.... any slight problems and its either glitch central, or it just simply won't work. |
#3
|
||||
|
||||
![]() Quote:
![]()
__________________
who knows who cares ![]() |
#4
|
||||
|
||||
![]()
There are actually five from the spektrum and yes correct that essentially it is just a plug! You say to just let helger just do it but with postage the cost will be close to £60, approx 24 pints - you see the dilemma i'm in for only 5 wires to be soldered!!
__________________
Mike Temple |
#5
|
||||
|
||||
![]() Quote:
![]()
__________________
who knows who cares ![]() |
#6
|
||||
|
||||
![]() Quote:
![]()
__________________
Mike Temple |
#7
|
||||
|
||||
![]() Quote:
use safety scissors and dont plug the iron in ![]()
__________________
who knows who cares ![]() |
#8
|
||||
|
||||
![]() arrryessss! I have done my risk assesment and method statement! Got my modified iron and plenty of sticky back plastic
__________________
Mike Temple |
#9
|
||||
|
||||
![]() Quote:
![]()
__________________
who knows who cares ![]() Last edited by bert digler; 21-02-2007 at 09:35 PM. Reason: ye |
#10
|
||||
|
||||
![]()
i have my mig welder, is that any good?
__________________
Mike Temple |
#11
|
||||
|
||||
![]()
yes but dont operate it near u genitals
![]()
__________________
who knows who cares ![]() |
#12
|
||||
|
||||
![]()
Have you asked your dad if you can take your trany apart
![]() |
#13
|
||||
|
||||
![]()
i have a hamster that is a fully trained grade 2 welder
__________________
Mike Temple |
#14
|
||||
|
||||
![]()
im also doing conversion myself
![]() ![]() |
#15
|
||||
|
||||
![]()
dont trust the hamster with u rocket car
![]()
__________________
who knows who cares ![]() |
#16
|
||||
|
||||
![]()
will succesful conversion be reviewed on the mudfish website mr monk
__________________
who knows who cares ![]() |
#17
|
||||
|
||||
![]()
Can you do it with fingers crossed?
![]() |
#18
|
||||
|
||||
![]()
o yes ! and toes
![]() |
#19
|
||||
|
||||
![]()
More like wires crossed, we will be able to spot u on the rostum, u'll be the only one with a smokey transmitter!
![]()
__________________
Mike Temple |
#20
|
||||
|
||||
![]()
but with £50 more in my pocket
![]() if anyone can get it to work, i can ! watch this space ! |
![]() |
Thread Tools | |
Display Modes | |
|
|