The Ultimate Brushless revo 3.3 fully upgraded

[electric]

hi,
it has been converted using the tekno conversion kit which is an excellent piece of kit and includes everything no extras needed.
9xl motor and a mamba max ESC
the mamba max esc is amazing, with a fan it's colder after a 20 minute run than when it started
it has the proline single steering servo adaptor with alloy steering saver. RPM arms, alloy skid plates, GTR shocks, alloy rockers, alloy shock mounts, rc monster heatsink, tekno wing mount (not in pics)
i have a set of max mulchers, proline crimefighters (23mm), and the stock revo tyres and wheels (one tyre has quite a major rip but can still be used but probably wont last long)
it comes with a tesco size bag full of spares
it needs a steering servo and batteries (i can include a pair of 5000mah ftx 7.4v lipos if needed)
it has a BEC which powers the servos
it uses the tekno throttle mount which reduces weight
it has the Forward only conversion and the standard 2 speed system
the 3 bodyshells are not in good condition and have cracks on the back of them (2 stock bodyshells and 1 proline thicker shell)
the radio box is ziptied because 2 out of them 3 screw mounts snapped (it is stronger with zipties anyway)
the battery mount also snapped but it is still held tightly with 2 out of the 3 screws and zipties to make sure it is extra strong where it snapped
so basically the electrics i can include:
tower pro mg995 throttle servo
mamba max esc with BEC (for use when using 4s lipos)
9xl motor, 7xl motor (slightly bent shaft) and a 6xl motor ((i can include a rcmonster heatsink if needed))
2 ftx 5000mah 7.4v lipos + a series connector to connect them



and videos here:
http://www.youtube.com/watch?v=eZIJRFyDuCU&feature=channel_page
http://www.youtube.com/watch?v=NbtwAlWI8q8&feature=channel


pictures of the car as it is today availiable here along with all the spares that are included:
http://s136.photobucket.com/albums/q...raxxas%20revo/
and the pictures of the upgrades are here:
http://s136.photobucket.com/albums/q...revo%20hopups/

prices:
tekno brushless conversion kit = £50

traxxas revo will all spares as shown and the standard wheels and tyres (one tyre has ripped off so needs replacing) it also comes with the set of RPM arms and the front RPM bumper as well as the traxxas alloy front pushrods = £130

the electrics:
feigao style 6xl motor and 9xl motor
feigao 7xl motor with a bent shaft
mamba max esc (comes with original box, CD, USB, and instructions)
BEC
brushless fan for the esc
£125
upgrades:

traxxas GTR shocks with all the springs pictured and the alloy spring retainers along with parts from a sway bar kit. the shocks also have alloy rod ends but 2 require oil and one shock requires a new shaft
£35

tekno wing mount with rear tower and body mounts = £10
proline 23mm hexes and nuts as well as a nut to undo them = £15
proline max mulchers on 23mm wheels = £30
proline crimefighters on 23mm wheels = £30
alloy rockers with bearings for 3 out of the 4 = £12
alloy shock mounts = £7
proline single steering servo conversion with alloy servo saver and linkages = £15
alloy arm for dual steering servo setup (new) = £5
alloy skids for part of the front and rear = £7

thanks for looking

richard

[electric]

i am looking to sell this as a roller now with the conversion kit
or i will part exchange for losi 8 hopups and buggy wheels and tyres
i will also consider selling the electrics on there own
thanks richard

[electric]

i have added prices to the original post and i have take some up to date pictures of the car and all the upgrades / spares

[electric]

right a few price drops before this lot goes on ebay...
traxxas GTR shocks - £15

traxxas springs and parts e.t.c - £10

a selection of heatsinks all at £2.50 each

3 working 27mhz AM receivers at £6
26.995 AM crystals - £4

27.045 crystals - £8