|
#1
|
||||
|
||||
![]()
I am half way through my B44 and I have had no problems as such pretty easy ! But one thing that's bugging me is that the front gearbox seems a little tight ! The manual says to use 2 shims behind the shaft gear and 3 on one side of diff and 4 on the other ! Is this correct or should I take some out to free it up ? It's not really tight but tighter that I would like !
__________________
Tim Snowdon The Silver Arrow B4 The Black B44 |
#2
|
||||
|
||||
![]()
Leave it as it is after the first few runs it will free off.
|
#3
|
||||
|
||||
![]()
Exactly, they are tight to start with, but soon free up.
|
#4
|
||||
|
||||
![]()
Just ensure the bearing is pushed all the way down the shaft.
I have had this problem where the shaft coating has come out too thick and the bearing does not fit flush with the end...causing a tightness!
__________________
Tamiya ~ Mugen Seiki ~ Viper RC ~ Pro-Line ~ Xpert Servos ~ BEAT ~ Protek RC ~ Amain Hobbies ~ LMR ~ Ultimate Racing ~ Nitrolux ~ Nibbo Designs ~ Stickit1 Racing ~ The World Famous TFR! ![]() |
#5
|
||||
|
||||
![]()
Thanks guys !
__________________
Tim Snowdon The Silver Arrow B4 The Black B44 |
![]() |
Thread Tools | |
Display Modes | |
|
|