|
#1
|
||||
|
||||
![]()
as title says what you got ? need for this years regionals & nationals
|
#2
|
||||
|
||||
![]()
im still after one if anyone has one ?? will be doing mid east regionals so can pick up or maybe if your local ish ?
cheers |
#3
|
||||
|
||||
![]()
Wraggy - i got mine from BQ for about £70. Two Stroke 650W
|
#4
|
||||
|
||||
![]()
dude ya can run off mine till you get sorted
|
#5
|
||||
|
||||
![]() |
#6
|
||||
|
||||
![]()
is 650w powerfull enough for 2-3 to charge off ???
|
#7
|
||||
|
||||
![]()
mine s a four stroke and its 700w should be ok mate but get four syroke not two ,
|
#8
|
||||
|
||||
![]()
Four stroke defo better as you dont have to run oil/petrol mix. i got mine cos its cheap. Yeah you could run numerous chargers off one 650W generator
|
#9
|
||||
|
||||
![]()
this is the one i was going for on fleebay http://cgi.ebay.co.uk/1kva-Silent-Su...3A2|240%3A1318
well worth it , same spec as a kipor too |
#10
|
||||
|
||||
![]()
Looks spot on Graham - certainly better than mine.
Wraggy - just looked at the manual for my BC6. It draws a maximum of 50W 240V 0.2 AMPS so in theory ( but i wouldnt recommend it ) you could run 13 chargers off a 650W genny. When you charge at 3.2A 12v DC ( or whatever 1C is for your Lipo packs ) then its not the same as 3.2A 240v AC. Your drawing less than 40 watts from one charger charging at 3.2A You really dont need to worry about generator output if you are only using chargers/soldering irons/dremels etc. HTH |
#11
|
||||
|
||||
![]()
cheers guys and thanks for your help
![]() ![]() |
#12
|
||||
|
||||
![]()
no worries bud - might see you guys at a couple of the 4wd East Mid Regionals
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|