|
#1
|
|||
|
|||
![]()
My bantam bc6 has a max charge of 5amps, as do most lipo chargers i believe. Does this mean there is no point in me buying a lipo greater than 5000mah? Am thinking vampire/LRP products - any point in getting them with this charger?
Cheers |
#2
|
|||
|
|||
![]()
It will be fine, you just won't be able to charge at 1C.
__________________
Quote:
![]() pm me bitch, or is it past your bedtime?
|
#3
|
||||
|
||||
![]()
I charge my 6000 mah Max Amps as 5000 mah - i.e. at 5 amps. Awesome punch and have never run anywhere near flat. Take a while to charge back up though.
__________________
https://www.facebook.com/pages/Drop-...g/259375641457 |
#4
|
|||
|
|||
![]()
good to know, cheers for the quick responses guys
![]() |
#5
|
||||
|
||||
![]()
Mostly club and regional racing you will be topping up between rounds, you should get half an hour at least to put back in what you took out in 5 minutes, if its a 5500 or 3500, you will use much the same racing, 5500 may have more punch, depending on the output C number.
I don't think a 5500 battery will make much difference to charger or charge times, topped up at 5 amps may take 10% longer (than 5.5amps), that may be 5min. You can pull them off 90% charged and still run a race. |
![]() |
Thread Tools | |
Display Modes | |
|
|