|
||
|
 |
|
||||||||||||||||||
|
#1
13-03-2009
|
||||
|
||||
INO-LAB HG-D261HB Servo
This I am told is THE servo to have for 18th scale
 Never even been out of the box, brand new, never used. First £30 (ono) gets it, + £2 P&P -- or available to pick up from Batley on Sunday. The HG-D261HB ultra high speed digital servo with new coreless motor technology is a great choice for extremely high performance tail control on your 400-500 class helicopter. Test Voltage: 4.8 VDC 6.0 VDC Operating Speed: Dynamic Torque: Stall Torque: 0.07 sec (60°) 2.4Kg/cm (33.16oz/in) 3.0Kg/cm (41.62oz/in) 0.06 sec (60°) 3.0Kg/cm (41.62oz/in) 3.6Kg/cm (50.09oz/in) ADDITIONAL TECHNICAL DATA CONTROL SYSTEM : PULSE WIDTH CONTROL OPERATING VOLTAGE : 4.8V ~ 6.0V OPERATING TRAVEL : 30°/ ONE SIDE PULSE TRAVELING 370us DIRECTION : COUNTERCLOCKWISE/ PULSE TRAVELING 1500 TO 1870 DEAD BANDWIDTH : 2us FEATURES AMPLIFIER TYPE : DIGITAL PULSE WIDTH CONTROLLER & FET DRIVER LONG LIFE POTENTIOMETER : 500,000 cycles MOTOR TYPE : CORELESS MOTOR TOP BALL BEARING : MR106 BALL BEARING GEAR MATERIAL : HEAVY DUTY CARBONITE GEARS HORN GEAR SPLINE : 25 SEGMENTS/ Ĝ5.96 (FUTABA TYPE) SPLINED HORNS : 4 CLASS CONNECTOR WIRE LENGTH : 270mm (10.63in) CONNECTOR WIRE STRAND COUNTER : 0.08mmx30EA DIMENSIONS SIZE : 30.0x13.0x33.3mm (1.18x0.51x1.31in) WEIGHT : 20.65g (0.73oz) with servo wheel installed
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing 
Last edited by Northy; 09-10-2011 at 06:12 PM. |
|
#2
14-03-2009
|
||||
|
||||
|
BUMPage - Offers?
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing
|
|
#4
30-03-2009
|
||||
|
||||
|
BUMP
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
