|
#1
|
|||
|
|||
![]()
Hi,
Anyone built the Diffs that come with the 2015-16 model, the one with the Bevel Gears as opposed to he straight ones that are still depicted in the build manual ![]() They seem very tight, and as the manual only shows you how to build the original straight gear diffs, I was wondering if anyone has some idea if they need building a different way???? Cheers |
#2
|
||||
|
||||
![]()
I had this with one.
Back off the diff screws slightly, reseat and retighten. This worked for me :-) Hope this helps. Once built the diffs are better IMO. Cheers Mark
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
#3
|
|||
|
|||
![]()
Hmmmmm
![]() Strange, but some reason if you bash / tap the diff cups inwards while on a hard surface, this sorts it out, go figure???? Last edited by phunki101; 21-01-2016 at 02:15 PM. |
![]() |
Thread Tools | |
Display Modes | |
|
|