Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 13-12-2015
nivlacf1's Avatar
nivlacf1 nivlacf1 is offline
Member
 
Join Date: Mar 2014
Posts: 71
Default Ko Propo Esprit 2.4Ghz conversion problem

Hi guys

i Converted the transmitter to 2.4Ghz with the flysky (i think it is) hack module ,

it worked great for a couple of races but now i have a strange issue, when i turn it on the transmitter and receiver seem to bind but when pushing the throttle or steering nothing seems to happen, the green light on the receiver seems to slightly blink when you push the rods on the transmitter suggeesting its receiving a signal from the transmitter but its like the signal is not then being sent from the receiver to the servo or esc? any ideas on what this might be? thanks

Last edited by nivlacf1; 14-12-2015 at 08:25 PM.
Reply With Quote
  #2  
Old 14-12-2015
Hog's Avatar
Hog Hog is offline
Mad Member
 
Join Date: Dec 2006
Location: Herne Bay
Posts: 1,994
Default

1 - Check your batteries in both the transmitter and car have enough charge in them.

2 - Go through the bind process again.

3 - Try another receiver if the rebind doesn't work. You say the green light blinks on the transmitter (I assume you meant receiver) which I've never noticed on mine which leads me to believe that you've either got a low battery or a bad connection somewhere.
__________________
Reply With Quote
  #3  
Old 14-12-2015
nivlacf1's Avatar
nivlacf1 nivlacf1 is offline
Member
 
Join Date: Mar 2014
Posts: 71
Default

sorry i did mean receiver, ive edited it now, thanks
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com