KF2 low grip setup help

[Dkfream]

Can anyone point me in the right direction to get a good base setup for Worksop for my KF2 in low grip please

Thanks

[racdeaf]

Nathan Waters's set up at worksop 27/09/15

http://www.racing-cars.com/images/Te...orksop_rd1.pdf

[mark christopher]

Originally Posted by racdeaf

Nathan Waters's set up at worksop 27/09/15

http://www.racing-cars.com/images/Te...orksop_rd1.pdf

if you read the set up sheet, Nathan ran mid configuration as did most at worksop, not low grip as was asked for

[HarlowS]

If only somebody made some Brass transmission housings to get more weight further back, perfectly balanced ........

[racdeaf]

Originally Posted by mark christopher

if you read the set up sheet, Nathan ran mid configuration as did most at worksop, not low grip as was asked for

ah ! time for me to nip in spec saver ..
now where did i put that coat ?

[Dkfream]

Originally Posted by HarlowS

If only somebody made some Brass transmission housings to get more weight further back, perfectly balanced ........

Do you make these ???

[Gayo]

Wow! That must weight 100g!

[HarlowS]

Not quite, 52g brass over 17g alloy.

Originally Posted by Gayo

Wow! That must weight 100g!

[HarlowS]

Im working on them at the moment yes.

Originally Posted by Dkfream

Do you make these ???

[butty1978]

I have mine from round 1 can not say its the best but its what I used in the final and was clearly my best run of the day.

Tried to add on here but struggling so if you still need one I can email it if you want.