x6 speedo location

[jono83]

whats the best way of securing the speedo in the 2 cell section ?

cheers

[Mike Hudson]

stick a square piece of lexan or carbon or acrylic etc that fits nice and snug into the 2 cell slot area so you have a sturdy base for the speedo to stick it down to with double sided

[jono83]

thanks mike was thinking along those lines

[Lee]

As mike said, i have found that the lrp speedos fit well with the cap beside them in the 2 cell position.

I think this is an excellent piece of inter company communication and forward thinking. Well done LRP and XFactory

[jono83]

i have a bit of carbon spare so i think i will cut that up and stick it down on that

[leon morrell]

mate lead weights in the bottom make it perfect height .. and help balance too..

[bigred5765]

same as leon, two strips of lead and double sided tape,

[jono83]

Originally Posted by bigred5765

same as leon, two strips of lead and double sided tape,

where can i buy some lead ?

[leon morrell]

pbm models. or your local tyre fitting place...

schumacher do some core rc lead thats quite nice stuff..

[bigred5765]

any were that balances wheels.

[jono83]

Any one know the accurate dimesions of the 2cell box I am not at home at the moment

[JCJC]

46mm across x 49mm would be tight

[jono83]

thanks

anyone ever installed a speedpassion gt in to an x6 ? its got quite a large footprint compared to some other speedo i have seen . pics would be a great help to

[leon morrell]

mate just put one in the 2 cell place looks well neat and the reciver the othere side and pt and switch the otherside

if that makes any sense.