Dualsky xc850tf issue

[luke]

Evening
Iv got issues with my esc and motor wired it up and now turned in the right direction but as soon as I connect the sensor wire it doesn't want to move and then the red led flashes on the esc? Tried another new lead but still the same??

[deano43]

Give SMD a call they are the distributors for daulsky and should be able to help you

[luke]

After a late night I found out it was poles needed changing but strang with no sensor wire it runs backwards then when I fit the sensor wire it runs the right way

[fidspeed]

with no sensor wire attached its the motor connections that determine rotation direction


when we use senseless motors in aeroplanes quite often the 3 motor wires are unmarked so its a guessing situation when connecting for the first try if the motor runs backwards you just swap any of the two motor wires round to reverse rotation of motor

with sensored motors the speedo/motor has to be in the correction connection to work properly (some speedos do have the ability to reverse direction in settingsas well )


dave

[luke]

Ok brilliant, it's so strange as when I unplug the sensor wire to the ear it sounds like the motor goes faster than with the wire in?

[luke]

Ok sorted a few other issues going on too

[Dave Dodd]

Make sure u have wired the motor wires correctly a-a b-b c-c
It should then work fine.