|
#1
|
||||
|
||||
![]()
Guy i need some advice. Just installed a Hobbywing XErun combo in the TRF 511, and using a KO prop 40mhz system. Im getting interference/ glitching like a mare.
As i hit the throttle, the servo twitches to the left, this seems intensified on the track too! Ive just don't a re install of all the wiring etc, tried a back up receiver, and crystals, still i get the glitch....any clues? No wiring is close to the receiver at all, was wondering about a glitch buster cap? Failing that, do some brushless just not like 40mhz? Its almost like a spike as i hit throttle, or pass through the neutral to brake. Need a fix as its my buddy Lozza using the car and i really want to sort it for him for this Friday! bests........lee
__________________
INSERT COIN
|
#2
|
||||
|
||||
![]()
Hi
Are you using a PT at all ? as I had mad glitching once when I had a 40mhz KO, if I moved the pt away from the receiver it was fine,or try moving the receiver away from the ESC
__________________
~Rick Evans~ ~LRP~shark st ft~lwb~ ~Carisma GT14B pro~ ~Schumacher KF2~ ~Schumacher Atom~ ~BSR Basher-RallyX~ ~Ascociated RC8.2e RallyX~ ~TeamC T8EV3 RallyX~ phat bodies worm-racing http://www.mendiprcraceway.co.uk |
#3
|
||||
|
||||
![]()
Id try a 2.4 system to see if it still does it. If it does maybe try the glitch buster or a cap on the esc. Could be a drop in power to the reciever at amp draw spikes.
|
#4
|
||||
|
||||
![]()
Thanks guys, glitch cap tested, nope, servo still twitches, my buddy purchased a Gemini X so I'm gonna fit that in a moment and see where we are, ESC is the other side of the car, so its not that, no power lines close, I'm next to the motor, but the only other option on the TRF i can see it between the motor and cells, which should in theory be worse, anyhow, off you fit some Sanwa 2.4 and try cure my insanity lol!
lee
__________________
INSERT COIN
|
![]() |
Thread Tools | |
Display Modes | |
|
|