Custom MG Racing Stickpack Lipo Battery Strap

[Mike Hudson]

More info to follow soon about these new battery straps from Pred Team Drivers Matthew Myers and Andy Myers...

[phil c]

any pics mike ?

[Mike Hudson]

All will be revealed soon

[mattym0310]

ill post pics in the morning

[blitzboy]

aw come on matt don t keep us waiting bro will be on your case for one when my new chassis arrives mate , antisipation is killing me

[ben]

Originally Posted by blitzboy

aw come on matt don t keep us waiting bro will be on your case for one when my new chassis arrives mate , antisipation is killing me

You gone for the plastic or graphite chassis this time round blitz?

[phil c]

i got the plastic one this time

[blitzboy]

plastic bomber dude

[AndyM]

proto piccys as promised..







Big thanks to Mike Hudson (MG Custom Parts) for putting our design on CAD

You'll notice in the piccy's that the prototype strap only has a mounting hole at the front; this is because of some miscommunications
The finished product will have one at each end

We're not taking any orders yet, but if you'd be interested drop me a pm.

thanks guys

[Mike Hudson]

They are made out of the highest quality 2mm cf and profesionaly milled and the perfect fit now for lipo stick packs.

The prototype was 8mm too long after abit of dimension confusion but is now finished and shortened to the correct size

The trackpower lipo in the picture is a 4900 which is 23mm high so if using lipos that have a lower height you may a need small bit of foam under the lipo battery on under the strap.

You will also there are two foams at the front of the lipo (Associated B4 battery foams) so you have 3 setup options of running you lipo to the rear, middle or front for where you want a little more weight to go.

Not ready for orders just yet though.
If you are interested and would like to be put on a reserve list then drop either Me or Andy a pm,
Watch this space...

[Bungleaio]

Looks good, pm sent

[Alfonzo]

Looks good indeed. Will almost certainly place an order at some time.

[mattym0310]

here it is on the finished car

[Tom3012]

Matt, could you not put the lipo the other way round, making the battery wires shorter? Looks good though! How much will it cost?

[mattym0310]

yeh but I don't think the top of the corally plugs would fit neatly under the body shell. not confirmed yet tom, not sure whether it will be forsale due to low numbers of people interested.

[Garry Driffill]

Originally Posted by mattym0310

yeh but I don't think the top of the corally plugs would fit neatly under the body shell. not confirmed yet tom, not sure whether it will be forsale due to low numbers of people interested.

Maybe cos' they dont fit the CAT SX matty

They look really neat from the pictures by the way, Top job!

[Tom3012]

Originally Posted by mattym0310

yeh but I don't think the top of the corally plugs would fit neatly under the body shell. not confirmed yet tom, not sure whether it will be forsale due to low numbers of people interested.

ahh i see, didnt think about that! How much would it cost if i wanted one as a one off then? roughly? saves me havin to make one if i do the same to my car

[phil c]

i might be interested in one , just depends on price and what lipos are going to be legal

[migsy]

if you are worried about the corallys rubbing under the shell, there is no need. all you need to do is solder your wires across the top of the corallys then shrink rap over the solderd area. i did this to my xrs and i had no probs.

hope the advice helps.

[mattym0310]

Originally Posted by Migsy

if you are worried about the corallys rubbing under the shell, there is no need. all you need to do is solder your wires across the top of the corallys then shrink rap over the solderd area.

can't you see on the pics that i've already done this?? [without the heatshrink]

thanks for the advice though!