losi xxxc indoor set up

[Hulk]

Well ive got rid of my b4 so its time to have a play with my new xxxcr. anyone know a good base set up for indoors? what springs, pistons, oil, camber link positions etc?

Craig Collinson

[Cockerill]

I'll get one posted up tomorrow for you

[jimmy]

I've created a sticky for posting setups - at the moment its just for any Losi, hope thats OK ??

jimmy

[tyreman]

Originally Posted by MtroniksRule!

Well ive got rid of my b4 so its time to have a play with my new xxxcr. anyone know a good base set up for indoors? what springs, pistons, oil, camber link positions etc?

Craig Collinson

Criag have a look here we are starting to get more uptodate with setup sheets .http://www.helgerracing.com/eknowled...eframeset.html

[Cockerill]

Here is my setup from last weeks regional at Batley:

Front
Toe - 0
Ride Height – Chassis Level With Rear
Camber - -1
Caster - Std
Sway Bar - None
Oil - 35
Piston - Orange
Spring - Blue
Limiters - None
Spindle Location - Low
Steering Ackerman – Rack
Bump Steer - 0
Camber Link - 2B
Shock Location - 4 Middle
VLA – Long
Front Wing - Yes
Notes - 15gramms in bulkhead

Rear
Toe-In - 3 inboard
Pivot Support - Std
Rear Hub Spacing – Middle
Driveshafts/Outdrives – Steel Dogbones/Steel Outdrives
Ride Height - Driveshafts just below Level
Sway Bar - None
Oil - 35
Piston - Red
Spring - Yellow
Limiters - Inside 0 - Outside 0
Camber Link – 2E 4 gold washers under the ball stud
Shock Location - 2 Middle
VLA - Short
Wing Position - Low
Battery Position - Forward

If you need anything else just ask

[jimmy]

*quickly goes back and deletes the setup section*

[PaulRotheram]

Copied his post in to the setup section for you :jimmeh

[jimmy]

some people, tut.