|
#1
|
||||
|
||||
![]()
my h2 grinding when i tighten motor plate any ideas
|
#2
|
||||
|
||||
![]()
from the gear box
|
#3
|
||||
|
||||
![]()
as i losen the 3 bolts that go through the diff housing it stops then then tighten it starts grrrrrrr
|
#4
|
||||
|
||||
![]()
have you had it apart recently
i did and forgot the "coned washer/spacer" that sits between gearbox case and moroplate (also had it in wrong way round too !! |
#5
|
||||
|
||||
![]()
ive had that problem it is the spacer between the gearbox and the motor plate that has crushed.
you can replace it or put 3 washers in between problem solved
__________________
Answer RC team driver Formby models HB Racing D216 HB Racing D418 www.kandmacoustics.co.uk |
#6
|
||||
|
||||
![]()
do any of you have pics please thank you
|
#7
|
||||
|
||||
![]()
just to geive me reference thank you
|
#8
|
||||
|
||||
![]()
Check the plastic casing that the slipper nut sits in is slotted home into the outer slipper plate before tightening up the slipper. I didn't do this once and my gearbox went all tight and grinding!
|
![]() |
Thread Tools | |
Display Modes | |
|
|