|
#1
|
||||
|
||||
![]()
I've found these while having a clear out, both brand new. Is the bumper from an XLS? How do I tell is the chassis is a long one or short one? Does anyone know the dimensions.
They're no use to me, but I have no idea of value. I know the bumper will be rare, the chassis too depending upon what it is. I hate to do this, but what might they be worth? Ta, G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing Last edited by Northy; 01-01-2014 at 02:19 PM. |
#2
|
||||
|
||||
![]()
Not sure if this helps but:
Wheelbase for SWB CAT is 250mm and for the XLS is 275mm. |
#3
|
||||
|
||||
![]()
The bumper is from an XLS.
|
#4
|
|||
|
|||
![]()
From proportion your chassis seem to be the long version. If so it will have an overall measure of 274 mm.
|
#5
|
||||
|
||||
![]()
Chassis length is 274mm, so a long one.
Does anyone need one? G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#6
|
||||
|
||||
![]()
I'd try an ebay auction m8
![]()
__________________
Life's too short to go slow! www.ymr.no Tech Tips, HopUps & Bling Xray 2014 XB4 4WD & 2WD | B4 FTW Night Fox XL | Mugen MRX-5 | RB | Futaba 3VCS FASST | Faskolor Visit my showroom |
#7
|
|||
|
|||
![]()
Don't listen to SHY... Hand them over to me I'm always looking for vintage CAT parts
![]() |
#8
|
||||
|
||||
![]()
Saw a bumper go for £50 before...
|
#9
|
||||
|
||||
![]()
I have had quite a lot of interest on the Cat parts, but no one knows what price they should be, so I have put them on Ebay - I thought that was the fairest way.
http://www.ebay.co.uk/sch/gravydrink...1&_ipg=&_from= G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
![]() |
Thread Tools | |
Display Modes | |
|
|