B4.1 front end to 12mm hexes

[Lee24h]

New to associateds and want to convert the front hubs on my c4.1 to front hexes what parts do I need
( im a fan of jconcepts)

[MiCk B.]

Hi,

You need the hex steering blocks (AS9880)
Hex axles either the AE (AS9880) or the JC (JC2169)
I've found the JC axles better.

You'll also need the hexes, AVID / JConcepts / Proline front alloy hexes.
OR AE do a plastic version as well.

Don't forget the hex wheels, AVID / JConcepts / Proline / AE.

MiCk B. :-)

[Aire valley]

brilliant reply from Mick.. not sure of the benefit of hexes on front wheels 2wd ? obvious benefit on driven wheels , but rolling wheels ?

[Mike Parker]

Originally Posted by Lee24h

New to associateds and want to convert the front hubs on my c4.1 to front hexes what parts do I need
( im a fan of jconcepts)

Here you go mate

http://number5rc.co.uk/jc2135-blue-c...1x6-p-195.html

http://number5rc.co.uk/jc2169-front-...ion-p-444.html

You will need the steering blocks as mentioned by Mick, but all the other hardware & shims will be covered off in the axles pack

[Lee24h]

The benefit is superfical i like jconcepts mono wheels

[MiCk B.]

Well,

No bearings in the wheels is a bonus. Much easier to change wheels trackside.

MiCk B. :-)

[Lee1972]

Was considering converting my Centro to front hexes does anyone do a slim front wheel?