|
#1
|
|||
|
|||
![]()
In need of an electrics guru, have the above an when everything's connected the motor gets hot after a few moments an the speedo I think seems to shut it off, any ideas with what's up with it or if it could hopefully be fixed?
|
#2
|
||||
|
||||
![]()
I remember something like this happening when I had the power wires (A,B,C) accidentally connected wrong.
__________________
Team Schumacher www.racing-cars.com Paint by www.customblitz.co.uk Feedback http://www.oople.com/forums/showthread.php?t=67178 |
#3
|
|||
|
|||
![]()
Checked all that an on paper everything seems to be connected right
|
#4
|
|||
|
|||
![]()
If your spur and pinion are not binding, and your drive train runs freely when not connected to a motor, then that only really leaves:
(a) gearing too high (fit smaller pinion, or larger spur gear or lower boost settings.) (b) speedo / motor is faulty also if you run on deep grass with not enough ground clearance it may overheat as you describe.
__________________
Team C TM2 / Tamiya M03 / Mardave V12 |
#5
|
|||
|
|||
![]()
The gear isn't even in the car mate, I reckon its the speedo that's had it but just wanted to try an find out why an if it could be fixed?
|
#6
|
|||
|
|||
![]()
I had a problem similar to this tried another motor and it was fine.
Callum |
![]() |
Thread Tools | |
Display Modes | |
|
|