|
#1
|
|||
|
|||
![]()
I run a Losi 8ight electric with a Hobbywing SC8 speedo and ACE 1015 servo. I am not having any glitching problem or any issues at all... But one of the guys at the track was talking about wiring in a BEC to up the voltage on the servo to make it quicker.
What is this all about... do I really need one?
__________________
Trader Feedback |
#2
|
||||
|
||||
![]()
Just read it properly haha you servo is only 6 volts
Unless your Bec is only 5 volts? If you bought the castle Bec it will up it to 6 volts. High Voltage is bettet 7.4 volts
__________________
BUDS BALLS
BIG AN SAGGY E REVO BAJA,SS TS REED All The Gear,and No Idea!! 4PKS,4PL PILLOW CASE CREW http://www.oople.com/forums/showthread.php?t=29834 |
#3
|
|||
|
|||
![]()
So if I was running a higher voltage 7.4v servo I might need a separate BEC?
__________________
Trader Feedback |
#4
|
||||
|
||||
![]()
Thats right the bec can delivery the required power to the servos, as there are not many esc that can give the HV servos the power they need unless running a seperate receiver pack.
If you have glitch problems or are worries you can use a glitch buster |
#6
|
|||
|
|||
![]()
I'm running an ACE 1015 servo which is rated at 6v I believe.
I have not been having any issues with glitching etc. so I think I will leave it as it is ![]()
__________________
Trader Feedback |
![]() |
Thread Tools | |
Display Modes | |
|
|