|
#1
|
||||
|
||||
![]()
Thought I would throw this out for ideas. Yesterday I had issues with my 2wd. Landing off a large ramp the car would just cut speedo power to the motor. Car didn't go dead stick though, steering continued to work. After a few seconds the car would come back to life and I could drive off again.
I changed sensor cables, checked all leads and even ended up putting a brand new speedo in the car - same issue occured. It's almost as if the speedo loses the RX connection, goes safe so the car cant throttle off somewhere, resets and then comes back to life. Weird ! Im running a Tekin RS, Speed Passion 7.5 V3 and KO 407s 2.4ghz rx. Has anyone else come across this occuring, if they did and they resolved it what did you change ? Cheers JP
__________________
If you have trader feedback for me please go to http://www.oople.com/forums/showthread.php?t=120160 - Thanks Currently utilising (abusing) Durango DEX210 / KO Propo Espritt III / Tekin / LRP / SpeedPassion / Savox |
#2
|
||||
|
||||
![]()
if you had same issue with two speedos
its pointing to tx/rx issues rather than speedo /motor but if it rx losing signal you would also lose steering ?? which you say you dont if its only after a large jump and its impact related its more likeley a poor connection to motor or sensor lead issue sounds like you have checked those too may be try another RX ?if you have one HTH fid |
#3
|
||||
|
||||
![]()
Answer in the Tekin thread.
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#4
|
||||
|
||||
![]()
Yep I saw that one, im going to test that tonight
![]()
__________________
If you have trader feedback for me please go to http://www.oople.com/forums/showthread.php?t=120160 - Thanks Currently utilising (abusing) Durango DEX210 / KO Propo Espritt III / Tekin / LRP / SpeedPassion / Savox |
![]() |
Thread Tools | |
Display Modes | |
|
|