|
#1
|
|||
|
|||
![]()
Just a quick 1 guys I took her for the maiden drive today and I noticed the front wasn't really driving that hard, to the point backend was spinning out
is this to do with the centre slipper or the Diffs ? thanks Just tightend the front to near max, but doesn't seem much diff, its as though no anger in the front compared to back |
#2
|
|||
|
|||
![]()
ok so ive got the centre slipper on MAX and ive done the front tight, seems better
I had a question, im running this on a street and its wet, when I accelerate ie PUNCH it can spin, as though its backend is driving harder. Or is that how it drives, because the batt etc is at the back end. thanks |
#3
|
||||
|
||||
![]()
Really depends on what tyres you are running? Tarmac is slippy for our buggy cars when wet. What setup are you running, poss go thinner oil in rear
__________________
'There are two choices in life-Take it or leave it !' Yokomo - Nemoracing Sb Designs http://www.fairfueluk.com/ |
#4
|
|||
|
|||
![]()
just the standard Oils from the Kit.
Im gonna reset all the diffs and slacken the slipper a touch, then see what its like. Don't mean to play devils advocate, but I just did the sons 44.2 and it was fine no backend sway even punching it seemed to go straight. I,ll have another go now see whats what |
#5
|
|||
|
|||
![]()
ok totally stripped diff and rebuilt seems good now, may tighten it a little but seems as good as it should.
Thanks |
![]() |
Thread Tools | |
Display Modes | |
|
|