FOR SALE Durango DEX410 Parts

[Chesty]

The following used Durango DEX410 parts are all in good condition as described. From a V3 so all current spec. parts:

TD210012-15 (RRP £97) Full set of V3 spec driveshafts in very good condition. SOLD

TD340006/7/20 etc, etc (RRP £25+) Full steering assembly ready to drop in with all bearings & ballstuds. SOLD

Large selection of plastic parts. Gearboxes, bulkheads, hoops, hubs, etc... (RRP £25+) None of these parts have ever been used. They were built on a spare chassis that was never used so are all perfect. SOLD

TD Various FF, FR, RF RR Alloy suspension holders plus all the pivot balls to go in them. Complete set (RRP £70 approx in total). Current V3 spec with the multi position rear hanger & all of the plastic inserts & pivot balls included. £28 Posted

TD320002/40 (RRP £49) V3 spec chassis (properly countersunk) with plastic side plates & brace fitted. Chassis has a few scrapes but 100% straight & generally good. £10 Posted

TD340071/330007 etc (RRP £12+) Full set of plastic hubs - rear 0 & 1 degree & front hubs & caster blocks. SOLD

V3 Kuhler bodyshell complete with 2 wings - 1 x 160mm wing & 1 x 175mm wing both in excellent condition with no splits. Very good condition - a few small areas of paint rubbed off & 1 x very small (5mm) split at side of bodyshell. Key areas around body mount holes are 100% good - ready to drop on. This bodyshell was used for the Boughton Raceway 2012 summer series promotional flyer - much nicer photo is in their club section. £13 Posted

Will combine postage on multiple purchases.

Clearing the last of my mass of TD stuff - if there's anything else you want not listed I might have it.