Best motor for XP esc

[buggy#0]

I have a spare xp sc450-bl, and I was looking on hobbyking for a fast cheap motor. The esc has a 6100kv limit, would this 5.5 be pushing it? http://www.hobbyking.com/hobbyking/s...or_6075KV.html

[Aire valley]

Bear in mind that your Reedy esc comes as standard with a 13.5t motor and although the instructions say down to 6100 kv that might only be with the Reedy sensor less motors. Depending on what vehicle you are putting it in, and on what sort of track, I would go for the 9.5t. The Turnigy motors have good reports but make sure that they work ok with sensor less esc.

[sly]

Felix, if its for our track at srcc then you will only need a 6.5 turn maximum.

[buggy#0]

It will be going in my truck project, I just want to see what I can squeeze out of it on 2s. I am also considering the ansmann 8t sensorless because it's only £35.