|
#1
|
||||
|
||||
![]()
what servo in SupaStox was thinking a savox sh-1257mg??
|
#2
|
||||
|
||||
![]()
Would be OK
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#3
|
|||
|
|||
![]()
i use the 1257tg but only because i had one spare but it is overkill really
|
#4
|
||||
|
||||
![]()
i ran a 1257 savox with the core speedo without the fan but with a powercap and it was ok
|
#5
|
||||
|
||||
![]()
I have a Savox SH-1257mg servo, can anyone recommend if this would be any good or is the torque to low.
@4.8volt Speed 0.9sec Torque 1.9kg @6volt Speed 0.7sec Torque 2.6kg
__________________
Race Cars: Associated B6 & B6D Vintage race cars: Associated RC10's, RC10T, B2 & T2 Kyosho Ultima XL Losi JRX2, JRX Pro & Pro SE Yokomo YZ10 94 The Veterans Inner Circle. Sponsored with Pot Noodle and Tunnocks. |
#6
|
||||
|
||||
![]()
A few too many typo's there! You'd better read that one again!
![]() |
#7
|
||||
|
||||
![]()
Got a futaba s9650 in mine but only due to it being spare,other wise would have an align mini servo in it which is the savox in a different case and about £15/£20
|
![]() |
Thread Tools | |
Display Modes | |
|
|