Go Back   oOple.com Forums > Trade Room > For Sale

 
 
Thread Tools Display Modes
  #1  
Old 11-02-2013
bomber's Avatar
bomber bomber is offline
Senior Member
 
Join Date: Oct 2010
Location: Essex
Posts: 334
Default Novarossi-Cordoba -Limited edition - .21 Rear Exhaust 9 Port Race Slide Carb. SG Cran

Novarossi-Cordoba -Limited edition - .21 Rear Exhaust 9 Port Race Slide Carb. SG Crank, Turbo Plug Collari Version

Its only had one gallon through it and it still has mechanical pinch

Engine only, no box or manual

150.00

Post by TNT courier on a nxt working day delivery once funds have cleared


Fuel recommendation:
This engine has been developed to be used with a fuel with a maximum of 25% nitro content and with an oil percentage not lower than 7%. We therefore suggest not to use it with different percentages compared to the ones specified here above.

Glow plug:
The glow plug of engine is a Turbo type glow plug.
Turbo glow plugs have a different shape than Standard glow plugs and there for are not interchange able with engines that are using Standard glow plugs!

Cooling head:
The cooling head of this engine sports some unique inscriptions to remember our 9th 1:8 IC world championship title.

Combustion chamber:
The combustion chamber is supported by rubber made O-Ring, this O-Ring absorbs some of the vibrations in this area and improves the combustion.

Crankshaft:
The crankshaft is grinded to increase the mixture flow and has a special shape to reduce turbulences inside the crankcase. The balancing is done by two inserts made of tungsten alloy and the inlet has a silicon filling to reduce the weight of the crankshaft to improve acceleration. The ball bearing was lowered to 5mm. The front part was extended to improve the seal against fuel leaking.

Sleeve:
The sleeve is manufactured with 9 transfer ports and an exhaust with booster ports, designed after fluid-dynamics studies, so we increased the maximum power, and taking care of the fuel consumption.

Rear Ball Bearing:
The rear ball bearing has high quality ceramic balls to minimize wear and inertia to improve acceleration and fuel consumption.

Carburetor:
The body of this carburetor is made from an aluminum alloy and features cooling ribs to keep the incoming fuel as cool as possible.

__________________
Trader feedback http://www.oople.com/forums/showthread.php?t=80845
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com