K1 Option Parts

[Moss Models]

Sorry if this has been asked but could someone tell me what options from the SX3 will fit the K1.

I will be switching to K1's over the next few months and need to know what to take off the SX3's.

Many thanks

[mark christopher]

shocks/springs
front alloy caster hub
front (front) alloy 10/7 degree inner pin mount (if the 4mm one)
rear alloy hub

[dibble34]

Does anyone know if the new rear m4 rear blocks for the k1 are the same as the sx3 ones, but but drilled out to 4mm?

[Moss Models]

Thanks for that.

Does that mean the pivot blocks are different?

[shaun m]

Originally Posted by dibble34

Does anyone know if the new rear m4 rear blocks for the k1 are the same as the sx3 ones, but but drilled out to 4mm?

don't know , but thats all i done with mine dave , they have loads of material on them ..

[shaun m]

Originally Posted by dragonmount74

Thanks for that.

Does that mean the pivot blocks are different?

i fitted the pivot blocks off my sx3 onto my k1 , just drilled the rear blocks to 4mm..

[dibble34]

Ok cheers Shaun

[Moss Models]

Cheers for that. Did you also fit the fronts?

[shaun m]

yes i did , a complete set