SOLD Bullistorm 60A Sensored Brushless ESC - £30

[Danosborne6661]

Bullistorm 60A v3.0 Brushless ESC

- Immaculate condition, not much use at all but no longer have the car.
- Same ESC essentially as the Hobbywing, Speed Passions etc
- Firmware all upgraded to v3.0

£30 posted - SOLD

Specification

Model 120A-V2 60A-V2
Cont./Burst Current 120A/760A 60A/360A
Resistance 0.0003ohm 0.0006ohm
Suitable Car 1/10, 1/12 on-road, 1/8, 1/10 scale rock crawler
Suitable Motor 5-6 NIMH or 2 Lipo =3.5T(on-road),=5.5T(off-road) =5.5T(on-road),=8.5T(off-road)
8-9 NIMH or 3 Lipo =5.5T(on-road),=8.5T(off-road) =10.5T(on-road),=17.5T(off-road)
Battery 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output 5.75V @3A Built-in BEC
Dimension 44mm(L)*32mm(W)*23mm(H)
Weight 105g 80g
Fan Working Voltage [email protected], maximum 8V.(The fan gets the power supply directly directly from the battery)
FEATURES

Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP,SpeedPassion,Novak,etc.
Seamlessly change to sensorless working mode when the sensor cable is broken.
Excellent start-up, acceleration and linearity features.
Built-in BEC has a powerful output to supplu all the electronic equipments.
Firmware can be updated through an USB adapter on the adcanced LCD Program Box (Optional equipment).
User programmable.Easily programmed with the SET button on the ESC and also compatible with the 3 digital LEDs Program Card and the adcanced professional LCD program Box.
3 running modes 9Forward mode,(Forward/Reverse mode, Rock Crawler mode)

4 steps of maximum recerse force adiustment.

Proportional ABS brake function with 4 steos of maximum brake force adiustment, 8 steps of drag-brake force

9 start modes (Also called Punch)from very aggressive(Lecel9)

8 steps of timing adjustment to suitable for all brushless motors.

Multiple protection features: Low voltage cut-off protection/Over-heat protection/Throttle signal loss protection/Motor blocked protection.