|
#1
|
|||
|
|||
![]()
Has anyone tried these servos for 8th Rally X or other classes
Servo HGM SST BB, MG Servo HGM SOR BB, MG the spec looks quite good on them but just wondered about reliability SST Specification Holding torque 6.0V, approx.: 200 N/cm Transit speed at 6.0 V, approx. : 0,06 Sek/40° All-up weight, approx.: 58 g Angular travel incl. trim, approx. : 2 x 45 ° Transit speed at 7.4V, approx. : 0,05 Sek/40° No-load current drain, approx. : 35 mA Torque at 6.0V, approx.: 90 N/cm Holding torque 7.4V, approx.: 220 N/cm Charging rate at 6.0V approx.: 2430 mA Dimensions (LxWxH): 40 x 19,5 x 40 mm Torque at 7.4V, approx. : 105 N/cm Bearings: Lager bb2x Replacement gearbox: 94051.2 Charging rate of 7.4V approx.: 2980 mA Gear unit: Getriebe mg Operating voltage : 4,8 ... 8,4 V Neutralimpuls: 1,5 ms Max. Ansteuerfrequenz: 2,5 / 400 ms / Hz SOR Specification Holding torque 6.0V, approx.: 220 N/cm Transit speed at 6.0 V, approx. : 0,075 Sek/40° All-up weight, approx.: 67 g Angular travel incl. trim, approx. : 2 x 45 ° Transit speed at 7.4V, approx. : 0,06 Sek/40° No-load current drain, approx. : 37 mA Torque at 6.0V, approx.: 105 N/cm Holding torque 7.4V, approx.: 255 N/cm Charging rate at 6.0V approx.: 2320 mA Dimensions (LxWxH): 40 x 20 x 40,5 mm Torque at 7.4V, approx. : 125 N/cm Bearings: Lager bb2x Replacement gearbox: 94052.2 Charging rate of 7.4V approx.: 2930 mA Gear unit: Getriebe mg Operating voltage : 4,8 ... 8,4 V Neutralimpuls: 1,5 ms Max. Ansteuerfrequenz: 2,5 / 400 ms / Hz |
![]() |
Thread Tools | |
Display Modes | |
|
|