|
#1
|
|||
|
|||
![]()
I recently purchased a Tekin rs pro second hand, I have hooked it up and set it up but it keeps just flashing led's 1,2,6,7, and not working
I have read in the manual this is wrong motor type so I have checked it and it is set to the correct motor type but still does it! |
#2
|
||||
|
||||
![]()
There is a Tekin section within this Electrics forum.
You'll need to hook it up to a pc with a hotwire interface to see what its currently set to. Maybe someone at your local club has one? or you can pick one up off oople/ebay or new from a shop. The hotwire software is available for download from teamtekin.com
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#3
|
||||
|
||||
![]()
They also do this when they're blown I'm afraid. Check with the hotwire, but you might need to send it in for repair.
|
#4
|
|||
|
|||
![]()
Running one cell?
What's your setup?
__________________
X6 Squared. No2 car. Novak. Savox. X6 Squared. No1 car. RS Pro, LRP. SC10 4x4 FT. Toro 120A. Tenshock. Savox. SC10. Stock spec ESC & motor. KO Propo. Powered by Nanotechnology. |
![]() |
Thread Tools | |
Display Modes | |
|
|