|
#1
|
||||
|
||||
![]()
Or should i stick with my SP gt 2.0 or is there anything else out there that is recommended i.e for ease of use and ease of setup.
__________________
Stevie Brew [email protected] http://www.oople.com/forums/showthre...hlight=stegger |
#2
|
|||
|
|||
![]()
LRP Flow due out anytime now
|
#3
|
||||
|
||||
![]()
Got a new SP Rev Pro Today, Was going for the LRP flow works until I realised the pro comes with a set up card, USB Link, fan etc: and free PC software all for £115. LRP is £135 pre order and as far as I have read only comes with a fan, USB link etc is extra £25.
Intial impression is good, nice build, lots of extras in box. Happy so far. PC software could be more user friendly, but no doubt will improve with software updates. |
#4
|
||||
|
||||
![]()
Hi,
I used one for the first time on Sunday, I had problems setting it up but after that it is so easy to program and works a treat. I used it with a new motor too so I can't tell you about the performance. It runs around the 60deg mark (programmer tells you how hot it runs). It is a good idea not having a switch and turning it on with a button I feel as there is less to go wrong. hope this helps, Sam
__________________
Sam Harris Serpent Spyder SRX-2 MM
|
#5
|
||||
|
||||
![]()
I purchased one after waiting an age for the Lrp.
More than happy with it , nice build quality , comes with everything and a lovely smooth controller. Dont hold your breath for the Lrp flow . |
![]() |
Thread Tools | |
Display Modes | |
|
|