|
#1
|
|||
|
|||
![]()
Hey!
New to brushless here, i just picked up a Cat SX and a Speed Passion 3.5 turn brushless was included with it. I need battery and esc recommendations. Some good "how to" info would help if someone could point me in the right direction. thanx! |
#2
|
||||
|
||||
![]()
If you want to stay speed passion, try the reventon pro, it has 3.5 turn limit and is reasonably priced. For batteries, get some core rc saddle lipo's, they are about £35. Just as a quick note, 3.5t is way too much for a buggy, even 4wd. Try 5.5 or 6.5 and it will be much better to drive.
|
#3
|
||||
|
||||
![]()
IMHO 3.5T in a Off Roader is just suicide
3.5T is more of an on road motor ! 6.5-8.5 is more usable !! My advice try selling the 3.5 Buying a milder motor also opens up more esc's |
#4
|
|||
|
|||
![]()
I'm not married to the Speed Passion motor. My second question was going to be about a milder set up for this car. In the old days, I remember being really happy with a 16t double in a 2wd, and a 14t....something....in a 4wd.
I assume a milder brushless set up would be close in comparison. Thanks for the help! |
#5
|
||||
|
||||
![]()
I run a 10.5 in my x2c and a 6.5 in my durango soon to be a 550 4 turn, have aloof at the Novak esc, I run the gtb and gtb 2 and they are bulletproof, battery wise I run the hpi saddles and they are fantastic
__________________
|
#6
|
|||
|
|||
![]() Quote:
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|