FOR SALE SCRT10, HN X1CR and 2560kv motor

[pieman5]

Hi all.

I want to focus on a large project through the winder so im having a small clearout of rc's and bits that i dont use anymore.


First up is a SCRT10 rolling chassis with loads of upgrades and loads of spares.

The roller has had very minimal use and the chassis is very clean and tidy.

The upgrades are as follows:

STRC center diff mount
STRC steering assembly
STRC rear hubs
STRC front one piece shock tower and bodymount
17mm hex conversion
HN 7075 t6 chassis braces
One piece motor mount
T-bone basher front bumper and rear skid plate
Also has CVD's front and rear.

The package includes a custom painted bodyshell that is close to brand new and the stock shell which is a basher but still very usable.

The standard scrt10 wheels + tyres are included along with a set of Medal Pro Woops, Proline bowties and some hobao racing spikes.

As you can see, there is close to another roller worth in spare parts and probably wouldnt take much to build one up with a decent amount of screws and a few parts.

The roller has a Towerpro servo fitted but no other electronics or radio gear.

For the whole lot i am asking £128.90 posted and including paypal fees











Next up is a very good Hong nor X1CR example.

A friend of mine built me up a very high standard CR buggy a while back, but i have now moved back to micros and 1/10th so this needs to go.

Basically every CNC part you can buy is on this:

shock towers, chassis braces, hingepin braces, upper front plate, steering ackerman, front knuckles, upper arm pin brace and wheel nuts.

It has CVD's all around, ally center diff mount, CF top diff plate, hybrid rubber and metal shielded bearing all around, stainless fixings all around and T-bone bumpers front and rear.

It has the 16mm Hong Nor big bore shocks and a set of hard blue springs.

It also has a X2 brushless conversion (because nitro isnt allowed to touch something this pretty) and a good amount of shells, wings and spares.

The fitted kyosho tyres are pretty worn but the wheels are fine. Also included is a set of on-road schumacher venom wheels + tyres and a set of Proline calibers.

The only bad points are that the chassis fitted has 2 extra holes drilled towards the back, i cant see it effecting it in any way but i thought it was worth mentioning.

The esc moutning area on the battery tray has also been dremelled off but there is still plently of space behind it to mount the esc.

For the whole lot, including postage and paypal fees i am after £139.05










Lastly for now is a Turnigy Trackstar 2560kv 6 pole 1/8th motor.

This has probably only seen about 6 runs and is a fantastic motor for a buggy on 4s or even 5s.

It has 5.5mm bullets fitted and all 3 wires are still at original length.

One of the mount holes has started to strip slightly but all other mount holes are fine.

Looking for £31.30 including postage and paypal fees