|
||
|
 |
|
||||||||||||||||||
|
#1
23-09-2012
|
||||
|
||||
c4.1 under bellcranck weight
how are the c4.1 under bell crank weights fitted i see they have screw holes in them but i dont have any holes in my chassis under the bell crank
__________________
Schumacher cougar laydown 
|
|
#2
23-09-2012
|
||||
|
||||
|
The weight goes on the steering bell-cranks.
Undo the two screws holding the bell-cranks / servo saver to the top plate. There is a small plastic part that goes between the two, remove and replace with the weight. Put the weight on so that the angle matches the chassis. MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.)
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Team Associated
Linear Mode
