tlr 22 and r10

[Sewey]

Hi, I am new to these forums, so im not sure if this will work, I have a tlr 22 in mid motor config and want to get a team orion r10 and I want to know if I put the r10 at the front just behind the servo, how small the servo (i know it needs to be a low profile servo) needs to be. Thanks for any help.

[Dombrasky]

Hi
If it helps i have a savox 1258 std size servo in my 22 and ive got 34 mm between
the servo and the battery brace
std servos are roughly 37 mm and low profiles 25mm ,so in theory youve got
46mm
as the r10 is 30.5 by 41.5 even with a std servo, with the esc sideways it will fit
someone with a low profile might be able to give you a measurement
just to confirm
are you putting the reciever up front aswell ?

[Sewey]

Thanks for the reply. That is very helpful, i was also looking at the Novak impact too, that is quite a bit smaller so I could put the receiver up front if there is space or on the ESC plate in front of the motor.