|
#1
|
||||
|
||||
![]()
Hi everyone,
I've just modified my TRF201 to fit a gear diff (from a Kyosho Ultima SC). It has 3000wt oil in there currently, but never having driven a gear diff, I don't know what oil would be a good thickness to start with for a 2WD buggy - and as it's not a common mod, I can't find TRF201 setups that can tell me anything about it. I drive on clay and sometimes also on astroturf. I'd like to try it on both surfaces, but the first test (in two weeks) will be on astroturf. So my question is... What oil do you use in your gear diff, or what would you recommend starting with? ![]() |
#2
|
||||
|
||||
![]()
i use 3000 fastrax oil, works fine for me on astro
|
#3
|
||||
|
||||
![]()
Same seems fine on grass/ astro in my dex210
__________________
-http://www.southwestrc.co.uk/ -http://www.trcmcc.co.uk/ -Schumacher KF -Schumacher Cat K1 |
#4
|
||||
|
||||
![]()
Thanks for the replies!
So Tomk26B4, the 3000wt oil in the diff you sold to me should do the trick on astroturf? ![]() I did notice it wasn't filled up completely (about a 30-40%), is there any harm in that (as long as it doesn't leak away)? |
#5
|
|||
|
|||
![]()
As I understand it, you don't need to fill it completely - just over 1/2 way usually (so you cover the "base" of the crown gears). More than that and it leaks into the gearbox! The oil is to add resistance to the gears operation, so they don't need to be fully immersed. HTH
![]() |
#6
|
||||
|
||||
![]() Quote:
![]() And it wasn't filled right up because i ran out of oil!
__________________
-http://www.southwestrc.co.uk/ -http://www.trcmcc.co.uk/ -Schumacher KF -Schumacher Cat K1 |
![]() |
Thread Tools | |
Display Modes | |
|
|