other body for an Ansmann Macnum (truck)

[peuge73]

I would like to know witch body is possible to adapt on a macnum.
The original one is really too weak and I want to change it.

thanks in advance for your help.

Hugues

[daveyboi1973]

I use these

http://www.ebay.co.uk/itm/41102-RC-1...item3a7495b1de

[Cameo]

You can use anything that fits the AE T4 but you also need the longer front body mounts from the T4.

I use the proline bulldog body its great.

[peuge73]

OK thank you for your answers.

[Mindauxx]

Originally Posted by Cameo

You can use anything that fits the AE T4 but you also need the longer front body mounts from the T4.

I use the proline bulldog body its great.

How do you exactly attach the AE T4.1 front body mounts to Macnum?
I've checked both RCs manuals, and it seems, that there should be no problem using stock Macnum front mounts, because they seem high enough for T4.1 body (I hope so at least...).
Well I've noticed one difference, AE body mounts are located at the very front (they are angled forward), while Macnum body mounts are straight vertical. There might be the problem with T4.1 bodies, because they have the very front part (grill) very low, while the front hatch is humped (and it becomes very high exactly above the shock tower). This might be the issue of fitting T4.1 bodies to unmodified Macnum.

[Frecklychimp]

TLR 22T rear motor body fits perfectly for the ultra modern look...

rear holes line straight up, front holes are different so need to drill new ones to fit Ansmann mounts, but the existing ones can be easily covered with a sticker!

[Dave Dodd]

tbh i think any of the st shells would fit with a bit of jiggling