USA TEAM DRIVER REPORT

[Mrs.TeamXtreme]

Hi Guys

I have enclosed a race report that I have received from one of our Team Drivers in the USA. This was at a Trophy Race.

Hi Yanina,

How are you? I just wanted to tell you about trophy race today. I qualified 5th and fin. 5th in the A. The X11 started out a little loose on new tires so I tried worn outs, WOW the car was so much easier drive. the track had a couple of big jumps but a triple that was a nightmare to hit consistently. I choose to double single it. I do not have alot of parts to go all out. It was at least a half a second quicker but if you crashed, you could be done. I still managed to keep pace with them. The car was awesome on the rest of the track. I was behind 3rd and 4th with 2 laps to go when I went for it! ....oops! I piped it. The 3rd place car crashed on the next turn. I would have had 4th with a chance for 3rd if I just waited! ... Oh well. I am still happy about how good the car was. I did not make that many changes. I raised the ride height to 20 mm ft and 24 rear, it seemed to jump better. I also put 2 o rings on the oneway that's it..

Brilliant!

[Tom3012]

Originally Posted by Mrs.TeamXtreme

The X11 started out a little loose..... I also put 2 o rings on the oneway that's it..

Has he put an X10 driveshaft in it???

.... I raced my pred today, weather was not too good.... 4th round of qualifying i lost control just before the start of the straight ( i hit a bump and slid)... had a head on with a lump of concrete and snapped the chassis in 2...

other than that car was flying!!!

[ben]

Originally Posted by Tom3012

had a head on with a lump of concrete and snapped the chassis in 2...

This is the 3rd chassis i have seen break now. Tom did it snap on like the cone bit at the front?

[niggs98]

ben car and concrete never mix well m8, i snapped the back off my xx4 last week at kiddy launching it backwards off the end of the straight when i lost it totally but crashes like that that break a car so badly (no offense tom) are normally a driver break rather than a car weakness, must say that the new developments looked good at epr yesterday especially towards the end of the day on adam and lewis's car, nice to see things being pushed forwards

[Tom3012]

Originally Posted by niggs98

ben car and concrete never mix well m8, i snapped the back off my xx4 last week at kiddy launching it backwards off the end of the straight when i lost it totally but crashes like that that break a car so badly (no offense tom) are normally a driver break rather than a car weakness, must say that the new developments looked good at epr yesterday especially towards the end of the day on adam and lewis's car, nice to see things being pushed forwards

was sort of my fault but there was also a big rut in the grass, and with it being wet, it hit the rut, the back end went away and slipped and there was the concrete.... all happened so quickly, wasnt much i could of done about it really....

and ben. it was at the front yes, close to the front inner pivot block, by the three screws ....

congrats btw ben, heard you did well yesterday

[niggs98]

Originally Posted by Tom3012

was sort of my fault but there was also a big rut in the grass, and with it being wet, it hit the rut, the back end went away and slipped and there was the concrete.... all happened so quickly, wasnt much i could of done about it really....
:

lol as i said no offence ment but just like your discription above just one of those crashes that cant be helped and is very hard on the car, i snapped my xxxcr in a very simlar way at epr early last year

[Tom3012]

Originally Posted by niggs98

lol as i said no offence ment but just like your discription above just one of those crashes that cant be helped and is very hard on the car, i snapped my xxxcr in a very simlar way at epr early last year

none taken sucks though doesnt it! the concrete wasnt even scratched

[New Losi]

So back to Tom's Question, is there an X11 one way now or was the X10 one being used ??

[Tom3012]

Originally Posted by New Losi

So back to Tom's Question, is there an X11 one way now or was the X10 one being used ??

there is an X11 oneway on the way so i believe ... i was just wondering if had opted to put an X10 driveshaft in instead of the X11 shaft?

[mro_racing aka Doorbell]

hay guys there is a oneway diff on the way but i think my x11 is the only one that has a oneway shaft in it that was becouse i sed to team xtreme that the car needs the oneway for the prototype car ive been designin but the one way shaft is just the x11 rear end of the prop and the x10 shaft and front one way

[Lee]

Yardy ran a 1 way in his x11 last summer, i think northy also had one later on in they year

Mr doorbell, without knocking what you have done with the pred, it is hard to see where you have improved on the design, from the pics it looks like any changes that you have made are not visible to the untrained eye. If you dont want people to know what you have done to the car, why start a thread titled "x11 Prototype". It doesn`t really make sense to me

[turbo_brick]

I've got a one way shaft for the x11 aswell, as you say it is just the rear part of an x11 shaft and the rest is x10.

Peter

[Northy]

My X11 (sat in the garage looking sad) is equiped with a 1 way prop shaft and a 1 way diff

G

[jimarea51]

My X11 (sat in the garage looking sad) is equiped with a 1 way prop shaft and a 1 way diff

G

Hmmm!!! I wonder if it may make an outing, sooner than you think!!!!

I told you he'd be back!!!

JIm

[Garry Driffill]

Interesting

[Lee]

WES got banned for less

[mattym0310]

Lee what the heck?? lol! what you on about.. sounds a bit random

What do you mean about Northy's Pred, is he going to start racing it again??

[rcracer]

cat among the pigeons springs to mind

[Tom3012]

Originally Posted by Lee

Yardy ran a 1 way in his x11 last summer, i think northy also had one later on in they year

Mr doorbell, without knocking what you have done with the pred, it is hard to see where you have improved on the design, from the pics it looks like any changes that you have made are not visible to the untrained eye. If you dont want people to know what you have done to the car, why start a thread titled "x11 Prototype". It doesn`t really make sense to me

I agree with Lee on something for once!!!!

[Lee]

WES said someting similar to jim before and he thread got deleted along with wes

He is just floating around in cyber space now spouting crap with xgod


You love me really tom