|
#1
|
|||
|
|||
![]()
hi,
i have got a gm 75 esc and having been trying to link it with my pc,i plug it in and it lights up but nothing else,i have have look every where for the software but i just come up with dead ends any one out there who could post a link to the software? please help its doing my head in |
#2
|
|||
|
|||
![]()
Un plug it from the battery press receive data on gm softwear then plug the wire into the esc it should then start reading esc setup, see if that works
On the softwear check u tick the USB port |
#3
|
|||
|
|||
![]()
i think i might be totally dum mate,i dont know where to get the software from i have been on all the sites and downloaded every one but when i connect it to the pc the usb it lights up but nothing else
|
#4
|
|||
|
|||
![]()
where do iget the software from for the esc usb link from????do i have to pay for it?if so how much
|
#5
|
||||
|
||||
![]()
I'm sure it is or was on the Schumacher website ( racing-cars.com) go to gm120 on there and it should have a link to it, otherwise look on graupner.com
__________________
John Jones --SMD--INSIDE LINE MODELS--PR RACING UK-- My feedback http://www.oople.com/forums/showthread.php?t=79696 |
#6
|
||||
|
||||
![]()
Go to here:
http://www.info-rc.net/?page_id=218 And under 'GM Software' download the AS-Soft (which is the main GM program) and also the Drivers, which are needed to get the USB working. Once you've got the GM software up and running, you need to: 1. Connect everything up 2. Select the correct port. 3. Select 'Fix port' 4. Click 'Receive data' 5. Press the little button on the GM USB lead circuit board. |
![]() |
Thread Tools | |
Display Modes | |
|
|