Robitronic Overloader and Trakpower v-balance question (marc christopher??)

[markwilliamson2001]

Hey up peeps,

I have my trakpower packs, and v-balancer, so thought I would dig them out tonight to see whats what, and give them a charge with my repaired overloader charger, AND the v-balancer.

I hook up the balancer to the charger, and switch the charger on. I then connect the battery to the balancer, and the balancer checks out the cells okay. I then activate link mode (to enable charging) on the balancer, then start the charging manually.

The charger then complains that a battery is not connected. I retried this 3 times with still no luck. I then removed said balancer, and just connected the battery straight onto the charger. The pack then charges up fine with no problems.

I presume that the balancer is not compatible with charger?? Or am I doing something wrong?

Hope someone can help
Cheers,
Mark

[mark christopher]

click the link here www.takpower.co.uk and goto the balancer / balancing does it look like that in the set up.
the blancer is comatable with any charger
ill pm you my number call me tonight

[JCJC]

Perhaps ........http://www.trakpower.com/

[markwilliamson2001]

Thanks so far guys. Sorted it in the end.

Had a look at the setup on trakpowers website at the chargers setup. Copied it and it now works. Thanks for the help. I had setup the balancer according to the instructions with the balancer, which do not show the leads plugged in the top of the balancer harness.

ALL WORKING NOW!

Thanks
Mark

[mark christopher]

good easier to show you a pic than describe it


pleased your finally up and running

mark

[Hog]

I had a similar problem last night using my Intellipeak Ice - it wouldn't detect the battery using the V Balancer (first time out with LiPo).

Tried a second balancer and it was fine, so looks like I just had a duff one

At least my LHS are replacing it FOC.